Tag: wood
Rustic Pine Shaker Rocking Chair
This rustic wood chair is based on the classic Shaker rocking chair but made from small pine trees. The pine trees were cleared from a ranch in Davie, FL. I gathered the trunks then shaved off the bark. The rungs were shaped with a drawknife. The chair is put together with mortise and tenon joinery with pva wood glue. The seat is woven with cotton wrap. The rustic chair is then finished with several coats of a mix of satin oil-based polyurethane and mineral spirits.
Rustic Tree Branch Wood Adirondack Chair
Here is a rustic wood Adirondack chair made from pressure treated dimensional lumber and shaved tree branches. The tree branches were harvested from a Black Olive Tree on the property. That sounds better than I was trimming the trees in my backyard and had some branches. The basic design was taken from a plan in some woodworking book I got in some library or bookstore. I really don’t keep accurate records on all things wood and wood-like. I’ll let some of you ‘history detectives’ figure that out. The rustic wood chair is more comfortable than it looks. This chair is my first experiment with
‘green woodworking’. What is green woodworking? I’m assuming you’re asking. I shall cut and paste a description of green woodworking for you. Because that’s just the kind of guy I am. The following is from Wikipedia. Which they got from the British Broadcasting Corporation. I don’t know why the BBC would have information on woodworking. But it is the BBC, so it must be good. Enjoy!
Green woodworking is a form of wood craft or in broad terms, carpentry, that works unseasoned or “green” timber into finished items. Unseasoned wood is wood that has been freshly felled or preserved by storing it in a water-filled trough or pond to maintain its naturally high moisture content. Green wood is much softer than seasoned timber and is therefore much easier to shape with hand tools. As moisture leaves the unseasoned wood, shrinkage occurs and the green woodworker can use this shrinkage to ensure tight joints in their work. To enhance the effect of the shrinkage, one half of a joint may be forcibly over-dried in a simple kiln while its encapsulating component is left green. The components tighten against each other as the parts exchange moisture and approach equilibrium with the surrounding environment. The swelling of the dry tenon inside the shrinking “green” mortise makes for an incredibly tight and permanent joint despite a lack of adhesives. Bodging is a traditional green woodworking occupation, where chair components were made in the woods and exported to workshops where the complete chairs were assembled by furniture makers (called cabinetmakers in the UK). Green woodworking has seen a recent revival due to its increased media coverage and the renaissance of hand tool woodworking in general. [1]
Reference: [1] http://www.bbc.co.uk/programmes/b00qsc3j
2 Modern Wood Chairs
Here are 2 Rustic reclaimed wood bungie / rubber hose or whatever strechable rope / hose / bungie you can find that will support a big boned Walmart shopper and still be comfortable, chairs. The design was taken from an instructable plan from the instructable website which was taken from the book ‘PlyDesign: 73 Distinctive DIY Projects in Plywood (and other sheet goods)’. The chair plan from that book was designed by Wil Holman. Maybe from Mother Earth website. It might be an offshoot of the lanyard chair or loom chair. But, you know, I really don’t have time to do all the research. Anyway the red one looks just like the on from the forementioned places. The other one is a variation on the same idea. When it comes to comfort… Comfort is a relative term, is it not? However, both are pleasing to the eye, are they not? The wooden chairs were made from reclaimed, recycled and repurposed wood. I used a ‘discount’ rubber hose from the Harbor Freight store. The quality of the stuff that they sell can be somewhat subpar. This ‘subpar-ness’ of the “rubber-like” hose has translated into a slightly less than ideal level of comfort. The original chair plan calls for a recycled rubber hose that you clean. I imagine you should really, really clean a used air hose before you use it in your chair. To acquire this used air hose for this wood bungie chair, you need to persuade a mechanic to give you one that is broken. Which means he/she would have to have a broken one on hand. The other option would be to go “dumpster diving” behind auto mechanic shops. Both options seem incredably un-appealing to me. So, as you can see, my decision to buy one at Harbor Freight tool store was a “no brainer”. The other wood chair was made using clear flexible water piping bought at one of the big box hardware stores. The really cool pillows were made by Grandma Luthin.
Modern Wood Desk with Laptop Riser
A simple clean modern desk with a sliding platform for keyboard as well as a separate wooden riser for a laptop. This desk was made from discarded 1/2″ plywood and non-discarded lumber from a big box home improvement store. The finish is a semi-gloss oil based polyurethane. The legs of the chair are large 4 inch by 4 inch pine timbers because I tend to over build things and if I bump into the desk it won’t get damaged or fall over and then also get damaged. I have painfully stubbed my toe on it but the desk didn’t move an inch. The wood desk has a sliding platform that, you guessed it, slides out. It is now holding a USB Midi Keyboard. I rarely, if ever, play the keyboard. But having it there gives me yet another reminder that I often fail to reach the lofty goals I set for myself. However, the desk did get built. And I was even able to blog about it, which I am doing now. I put a simple wood moulding around the top edges and the roll out shelf. The pine moulding hides the sides of the plywood. It serves as a handle for the shelf. It also keeps pencils from rolling off the top of the desk. Who could ask for more. The design of the desk lies somewhere between a Frank Lloyd Wright ‘Prarie Style’ home and an offshore oil rig. Above the recycled, reclaimed or re-purposed wood desk, I made a laptop riser stand so it is easier to see the computer and you can also place some letters, pens and such to clutter up the area. The riser stand is made from 1 by 4 inch pine. I hope you have enjoyed yet another woodworking blog post on my woodworking, art, etc. blog page. Tags: woodworking, wood, modern, rustic, decor, recycled, reclaimed, laptop, computer, desk, cool, wonderful, delicatessen
Contour Wood Chair, Cabinet / Table and Light Fixture
Here is a wood chair, cabinet and light made from wood collected from various neighbors. As the saying goes “One man’s discarded wood in good to fair condition becomes another man’s patio furniture”. The relatively un-rustic chair, table / cabinet and lamp were designed for drawing, working or reading outside. Everything was primered and then painted with two coats of white latex paint to hide the good to fair to poor condition of the wood. The wood chair, cabinet and light were all made from recycled or reclaimed materials. I still haven’t figured out the difference between something being recycled or reclaimed. I think I will ‘Google’ it. (after a brief intermission) I just tried “Google-ing” the terms ‘recycled vs. reclaimed’ because it would be great if I and someone reading this blog post might actually learn something together. Getting back to the Google search. I was reading the first result from the google search which was written by a self described ‘Eco-Patriot’. He described at great length the differences between recycled and reclaimed. He also added the word ‘recovering’. After reading, well actually skimming, well actually reading the first sentence then quickly losing interest. Needless to say, I wasn’t able to read the other 455,000 other results that came up, therefore, I have not learned anything. However, now I can throw in the word ‘recovered’ when talking about things that are ‘recycled’ or ‘reclaimed’. If I run out of things to say then I’ll ‘recycle’ the article by cutting and pasting it into this here blog post. The danger of doing this, besides recieving a ‘ cease and desist’ letter, is that if it is easy for you to understand the article, then I will look like a complete idiot for not understanding it myself. So let’s just say the article was so poorly written that it was totally incomprehesable to either you or I. So, we can all agree that it is not my fault. The white painted recycled chair was patterned after a porch swing, I found in a book with woodworking plans. The reclaimed wood chair was made so your arms have room to move and is tilted slightly forward so it is easier to stay alert and work on your project. The recovered wood chair is also a little higher so your legs are able to stretch and circulate. The cabinet next to it was made from reclaimed plywood and has three shelves to store some stuff and things. The wooden cabinet has knobs made from tree branches. You can’t see them in the photo, so you’ll just have to imagine how awesome they are. The cabinet opens on both sides. I guess for convenience. I can’t really remembered why I made it that way. The hinges for the cabinet where bought at the ‘Habitat Restore’ which sells hardware that were apparently left over and/or not good enough for a ‘Habitat for Humanity’ Habitat, that I can only assume was being made for humanity. The lamp was made from a work light and two pieces of wood. It allows you to work or read at night. Lights are very useful in the dark. You might want to make a note of that for future reference. See you did learn something.
Wooden Beach Folding Chair
This Rustic wood folding chair is made for the beach. It has never actually been to the beach. It has heard about the beach and even seen pictures, but it has never been. The folding chair has basically been on the front porch watching the cars going by. This wood chair has also seen the occasional Jehovas Witness as well as traveling salesmen selling landscaping services, magazine subsriptions and automobile windshields. Yes, a man once offered to examine my windshield for free to see if I needed a new one and lo and behold he found a problem. It was some kind of blemish, perhaps a nick or scratch of some sort. This man had the eyes of an eagle. Anyway, I passed on his windshield replacement or repair services. But I did keep the free window inspection. The chair and I where both bewildered. Anyway, getting back to the subject at hand. It was made from a discarded wooden shipping container. That perhaps was used to ship something somewhat large. The wood container was disassembled (obviously) and then hand planed by hand. The slats where then rounded with a drawknife and then but together with exterior grade wood screws. I can’t remember what type of finish I used because it was made about ten or so years ago. The reclaimed wood chair has a weathered look, mainly due to the weather. This folding beach chair has seen better days and I have seen better chairs. There are actually two of these wooden chairs. The other one looks exactly like the other. So just hit the ‘refresh’ button on your web browser and it will be just like seeing the other one. If you are interested in some other rustic woodcrafts I have made go to the gallery page at this website or click on the Etsy link to go to my store “BradLuthinWoodcrafts”. Thank you for your time.
Outdoor Garden Bench
Here is a outdoor rustic woodland bench made from reclaimed wood. Ok the wood is not reclaimed. It was claimed from Home Depot. Of course Home Depot claimed in from a tree so in that case I was reclaiming it from them. And why I’m correcting my previous statements the wood bench is not really in the ‘woodland’ style. Although there are no hard and fast rules about what constitutes the ‘woodland style’. I just like saying the word woodland. It is all the rage in the mom groups all across the suburban landscape. The rustic wood bench is based on a plain by black and decker. It has a scalloped back and rounded arm rests. This gives it the look and feel of garden log furniture. This rustic bench fits in with any garden decor. Including the red hot new woodland gardens. Whatever a woodland garden looks like. Even if someone had a fairy garden and those fairies (not the one with the garden) but the fairies for whom the garden is for, had their own garden for humans or some type of ‘human like’ form, then the bench could be used for them. That was a really long run on sentence. Was it not? Moving on. This rustic bench was made to replace a worn out adirondack bench made from reclaimed plywood. That is really irrelevant, but then again most of this post is so not relevant. This garden bench is very sturdy. And can support many a persons. It is as strong as a ship. If that ship happens to be made of pressure treated two by fours. Then is also finished with a waterproof stain/varnish for plenty of outdoor use. This rustic bench is also slightly more comfortable that it looks. Which is to say it is a little bit less comfortable. It would go great with other rustic furniture, such as, but not limited to log tables, wood Adirondack chairs, plants, planters, plant stands, things made with tree branches and many other garden, rustic, woodland and wooden decor.